openintents から 無料で公開されている.
サポートされるセンサーは以下.
加速度計
時針
向き
温度
光
近接性
気圧
重力
線形加速度
回転ベクトル
ジャイロスコープ
できること
デバイスにセンサーイベントを送信
パソコン上及びデバイス上でそのイベントを記録
記録したイベントをデバイス上で再生
adb コマンドで 補完 させる
adb コマンドがめんどくさい場合は
コマンドを補完(completion)してもらいましょう.
何が補完できるか.
・オプション
・サブコマンド
・デバイスにインストールしているパッケージ名
・ローカル/リモートファイル名
・パソコンに接続しているデバイスシリアル名
...
# /* vim: set ai ts=4 ft=sh: */
#
# Copyright 2011, The Android Open Source Project
#
# Licensed under the Apache License, Version 2.0 (the "License");
# you may not use this file except in compliance with the License.
# You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
#
_adb() {
unset -v have
type $1 &> /dev/null && have="yes"
if [ "$have" != "yes" ]; then
return
fi
local where i cur serial
COMPREPLY=()
serial="${ANDROID_SERIAL:-none}"
where=OPTIONS
for ((i=1; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-s)
where=OPT_SERIAL
;;
-p)
where=OPT_PATH
;;
-*)
where=OPTIONS
;;
*)
if [[ $where == OPT_SERIAL ]]; then
where=OPT_SERIAL_ARG
elif [[ $where == OPT_SERIAL_ARG ]]; then
serial=${cur}
where=OPTIONS
else
where=COMMAND
break
fi
;;
esac
done
if [[ $where == COMMAND && $i -ge $COMP_CWORD ]]; then
where=OPTIONS
fi
OPTIONS="-d -e -s -p"
COMMAND="devices connect disconnect push pull sync shell emu logcat lolcat forward jdwp install uninstall bugreport help version start-server kill-server get-state get-serialno status-window remount reboot reboot-bootloader root usb tcpip"
case $where in
OPTIONS|OPT_SERIAL|OPT_PATH)
COMPREPLY=( $(compgen -W "$OPTIONS $COMMAND" -- "$cur") )
;;
OPT_SERIAL_ARG)
local devices=$(command adb devices 2> /dev/null | grep -v "List of devices" | awk '{ print $1 }')
COMPREPLY=( $(compgen -W "${devices}" -- ${cur}) )
;;
COMMAND)
if [[ $i -eq $COMP_CWORD ]]; then
COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
else
i=$((i+1))
case "${cur}" in
install)
_adb_cmd_install "$serial" $i
;;
pull)
_adb_cmd_pull "$serial" $i
;;
push)
_adb_cmd_push "$serial" $i
;;
reboot)
if [[ $COMP_CWORD == $i ]]; then
args="bootloader recovery"
COMPREPLY=( $(compgen -W "${args}" -- "${COMP_WORDS[i]}") )
fi
;;
shell)
_adb_cmd_shell "$serial" $i
;;
uninstall)
_adb_cmd_uninstall "$serial" $i
;;
esac
fi
;;
esac
return 0
}
_adb_cmd_install() {
local serial i cur where
serial=$1
i=$2
where=OPTIONS
for ((; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-*)
where=OPTIONS
;;
*)
where=FILE
break
;;
esac
done
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $where == OPTIONS ]]; then
COMPREPLY=( $(compgen -W "-l -r -s" -- "${cur}") )
return
fi
_adb_util_complete_local_file "${cur}" '!*.apk'
}
_adb_cmd_push() {
local serial IFS=$'\n' i cur
serial=$1
i=$2
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $COMP_CWORD == $i ]]; then
_adb_util_complete_local_file "${cur}"
elif [[ $COMP_CWORD == $(($i+1)) ]]; then
if [ "${cur}" == "" ]; then
cur="/"
fi
_adb_util_list_files $serial "${cur}"
fi
}
_adb_cmd_pull() {
local serial IFS=$'\n' i cur
serial=$1
i=$2
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $COMP_CWORD == $i ]]; then
if [ "${cur}" == "" ]; then
cur="/"
fi
_adb_util_list_files $serial "${cur}"
elif [[ $COMP_CWORD == $(($i+1)) ]]; then
_adb_util_complete_local_file "${cur}"
fi
}
_adb_cmd_shell() {
local serial IFS=$'\n' i cur
local -a args
serial=$1
i=$2
cur="${COMP_WORDS[i]}"
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
if [[ $i -eq $COMP_CWORD && ${cur:0:1} != "/" ]]; then
paths=$(command adb ${args[@]} shell echo '$'PATH 2> /dev/null | tr -d '\r' | tr : '\n')
COMMAND=$(command adb ${args[@]} shell ls $paths '2>' /dev/null | tr -d '\r' | {
while read -r tmp; do
command=${tmp##*/}
printf '%s\n' "$command"
done
})
COMPREPLY=( $(compgen -W "$COMMAND" -- "$cur") )
return 0
fi
i=$((i+1))
case "$cur" in
ls)
_adb_shell_ls $serial $i
;;
/*)
_adb_util_list_files $serial "$cur"
;;
*)
COMPREPLY=( )
;;
esac
return 0
}
_adb_cmd_uninstall() {
local serial i where cur packages
serial=$1
i=$2
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
where=OPTIONS
for ((; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-*)
where=OPTIONS
;;
*)
where=FILE
break
;;
esac
done
cur="${COMP_WORDS[COMP_CWORD]}"
if [[ $where == OPTIONS ]]; then
COMPREPLY=( $(compgen -W "-k" -- "${cur}") )
fi
packages="$(
command adb ${args[@]} shell pm list packages '2>' /dev/null 2> /dev/null | tr -d '\r' | {
while read -r tmp; do
local package=${tmp#package:}
echo -n "${package} "
done
}
)"
COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -W "${packages}" -- "${cur}") )
}
_adb_shell_ls() {
local serial i cur file
local -a args
serial=$1
i=$2
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
where=OPTIONS
for ((; i <= COMP_CWORD; i++)); do
cur="${COMP_WORDS[i]}"
case "${cur}" in
-*)
where=OPTIONS
;;
*)
where=FILE
break
;;
esac
done
file="${COMP_WORDS[COMP_CWORD]}"
if [[ ${file} == "" ]]; then
file="/"
fi
case $where in
OPTIONS)
COMPREPLY=( $(compgen -W "$OPTIONS" -- "$cur") )
_adb_util_list_files $serial "$file"
;;
FILE)
_adb_util_list_files $serial "$file"
;;
esac
return 0
}
_adb_util_list_files() {
local serial dir IFS=$'\n'
local -a toks
local -a args
serial="$1"
file="$2"
if [ "$serial" != "none" ]; then
args=(-s $serial)
fi
toks=( ${toks[@]-} $(
command adb ${args[@]} shell ls -dF ${file}"*" '2>' /dev/null 2> /dev/null | tr -d '\r' | {
while read -r tmp; do
filetype=${tmp%% *}
filename=${tmp:${#filetype}+1}
if [[ ${filetype:${#filetype}-1:1} == d ]]; then
printf '%s/\n' "$filename"
else
printf '%s\n' "$filename"
fi
done
}
))
# Since we're probably doing file completion here, don't add a space after.
if [[ $(type -t compopt) = "builtin" ]]; then
compopt -o nospace
fi
COMPREPLY=( ${COMPREPLY[@]:-} "${toks[@]}" )
}
_adb_util_complete_local_file()
{
local file xspec i j
local -a dirs files
file=$1
xspec=$2
# Since we're probably doing file completion here, don't add a space after.
if [[ $(type -t compopt) = "builtin" ]]; then
compopt -o plusdirs
if [[ "${xspec}" == "" ]]; then
COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
else
compopt +o filenames
COMPREPLY=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
fi
else
# Work-around for shells with no compopt
dirs=( $(compgen -d -- "${cur}" ) )
if [[ "${xspec}" == "" ]]; then
files=( ${COMPREPLY[@]:-} $(compgen -f -- "${cur}") )
else
files=( ${COMPREPLY[@]:-} $(compgen -f -X "${xspec}" -- "${cur}") )
fi
COMPREPLY=( $(
for i in "${files[@]}"; do
local skip=
for j in "${dirs[@]}"; do
if [[ $i == $j ]]; then
skip=1
break
fi
done
[[ -n $skip ]] || printf "%s\n" "$i"
done
))
COMPREPLY=( ${COMPREPLY[@]:-} $(
for i in "${dirs[@]}"; do
printf "%s/\n" "$i"
done
))
fi
}
if [[ $(type -t compopt) = "builtin" ]]; then
complete -F _adb adb
else
complete -o nospace -F _adb adb
fi
Cross Reference: /sdk/bash_completion/adb.bash
以下のようなコンソール出力になります.
「adb」と文字を入力したあとのひとつスペースに注意しながらの
~ $ adb <TAB> -d devices help pull shell usb -e disconnect install push start-server version -p emu jdwp reboot status-window -s forward kill-server reboot-bootloader sync bugreport get-serialno logcat remount tcpip connect get-state lolcat root uninstall ~ $ adb -<TAB> -d -e -p -s ~ $ adb -s 01f9739f4fd1471c 192.168.10.101:5555 ~ $ adb push a.apk /<TAB> /acct/ /dev/ /init.environ.rc /mnt/ /sdcard/ /ueventd.rc /cache/ /etc/ /init.mako.rc /persist/ /seapp_contexts /vendor/ /charger /file_contexts /init.mako.usb.rc /proc/ /sepolicy /config/ /firmware/ /init.rc /property_contexts /storage/ /d/ /fstab.mako /init.superuser.rc /res/ /sys/ /data/ /init /init.trace.rc /root/ /system/ /default.prop /init.cm.rc /init.usb.rc /sbin/ /ueventd.mako.rc ~ $ adb uninstall <TAB> Display all 217 possibilities? (y or n) android com.facebook.orca com.adamrocker.android.input.simeji com.facebook.pages.app com.adobe.flashplayer com.farproc.wifi.analyzer com.adobe.reader com.gmail.jp.raziko.radiko com.alensw.PicFolder com.google.android.apps.adm com.amazon.mp3 com.google.android.apps.ads.publisher com.americanexpress.android.acctsvcs.japan com.google.android.apps.authenticator2 com.andrew.apollo com.google.android.apps.books com.android.apps.tag com.google.android.apps.chromecast.app
特に, ローカル/リモートディレクトリの補完が快適です.
そんな bash の 補完(completion)なスクリプトは他にもいろいろ見つかります.
android-completion/android at master · mbrubeck/android-completion · GitHub
metasystem/modules/android/shell/bash-completion.sh at master · garethstockwell/metasystem · GitHub
adb - romannurik-code - Roman's miscellaneous sample code - Google Project Hosting
お試しあれ.
Android Studio の設定で「バージョン」の記述してるとこありすぎね?
あちこちに, 似たようなバージョン的な記述あります Android Studio.
プロジェクトの改修や移動などで変更しなければならないとき
どこを編集したらいいのか.
いや, 同期されるのか
いや, 優先順位が決まっているのか
どうなのか よくわかりません.
項目もたくさんあります.
どんなのあるか並べてみます.
Default Settings
[Quick Start]-[Configure]-[Project Default]-[Settings]
[File]-[Other Settings]-[Default Settings]
+ Compiler
+ Java Compiler
+ Project byte code version(JDK Default(1.7))
Default Project Structure
[Quick Start]-[Configure]-[Project Default]-[Project Structure]
[File]-[Other Settings]-[Default Project Structure]
+ Project Settings
+ Project
+ Project SDK(Android API 19 Platform)
+ Project language level(7.0 - Diamonds, ARM, multi-catch etc.)
+ Platform Settings
+ SDKs
+ Build target(Android 2.3.3)
+ JDK location(/Library/Java/JavaVirtualMachines/jdk1.7.0_51.jdk/Contents/Home)
Project Structure
[File]-[Project Structure]
+ Project Settings
+ Modules
+ Properties
+ Android Plugin Version(0.9.1)
+ Compile Sdk Version(19)
+ Build Tools Version(19.0.3)
+ Dependencies
+ (com.android.support:support-v4:19.0.0)
+ (com.android.support:appcompat-v7:19.0.0)
+ (com.google.android.gms:play-service:+)
+ Platform Settings
+ Android SDK
+ JDK location(/Library/Java/JavaVirtualMachines/jdk1.7.0_51.jdk/Contents/Home)
AndroidManifest.xml
<uses-sdk
android:minSdkVersion="9"
android:targetSdkVersion="19" />
build.gradle
buildscript {
dependencies {
classpath 'com.android.tools.build:gradle:0.9.1'
}
}
android {
compileSdkVersion 19
buildToolsVersion '19.0.3'
defaultConfig {
minSdkVersion 9
targetSdkVersion 19
}
compileOptions {
sourceCompatibility JavaVersion.VERSION_1_7
targetCompatibility JavaVersion.VERSION_1_7
}
}
dependencies {
compile 'com.android.support:support-v4:19.0.0'
compile 'com.android.support:appcompat-v7:19.0.0'
compile 'com.google.android.gms:play-services:+'
}
設定項目やエラー後に再設定しようとしても, 今度は, 設定画面にたどりつけなかったりします.
面倒なので表にしてみます.